Introduction¶

Welcome to the LoRa Edge™ Tracker Reference Design User Guide. In this guide, we introduce you to the Semtech LoRa Edge Tracker Reference Design V1.0 and explain how to set it up with a network server and the associated mobile application, LoRa Edge Config.

The reference design consists of the following components:

• LoRa Basics™ Modem-E, built with the LR1110 chip

• STM32WB55CG processor

• Accelerometer sensor

• Hall Effect sensor

• Four antennas:

  • Sub-GHz antenna

  • 2.4 GHz antenna

  • GNSS PCB antenna

  • GNSS Patch antenna

Figure 1: LoRa Edge Tracker Reference Design V1.0 (Bottom)¶

Figure 2: LoRa Edge Tracker Reference Design V1.0 (Top)¶

Figure 3: LoRa Edge™ Tracker Reference Design V1.0 (Full)¶

Figure 4: LoRa Edge™ Tracker Reference Design V1.0 (Enclosure)¶