build
Start or Restart the Service
To start the Test Bench, enter this command in the SSH console:
sudo systemctl start testbench |
To restart the Test Bench, enter:
sudo systemctl restart testbench |
Note: The Test Bench should automatically start after a backup and restart after every power cycle.
- Introduction and Objectives
- Set up the Software
- Use a Different Gateway
- Configure the Network Server
- Start or Restart the Service
- Stop the Service
- Test Bench Status
- Send API Commands to Configure the Test Bench
- Check Test Results
- Download Results Locally
- Test Bench APIs
- Configurator APIs