Knowledge Base
HOME » KNOWLEDGE BASE » FORUM

SX1276 with shared RFIO (no RF switch)

Hi,
for the development of a SX1276-module with PA/LNA-frontend I want to
use the SX1276 with shared RFIO on 868 MHz. Is there any design note on how to
find the values for the necessary matching/coupling network?
Is there an example for 868 MHz. I need at least 10 dBm @ 50R at the output of the network.

Thanks for any information!

Andreas
Avatar
Hi,

There is reference designs in the product page: https://www.semtech.com/products/wireless-rf/lora-transceivers/sx1276

The "SX1276MB1JCS - 433/868 MHz mbed Shield, Switchless (Ref Design Only)" should help you: https://semtech.my.salesforce.com/sfc/p/E0000000JelG/a/2R0000001NO0/a1GGLQTdl3MwMf3mEYAchev9.UELoh7tSV8.Om_MMak?__hstc=212684107.8fd20b5b438ba09ca1837a8def78acc5.1581581557861.1589623557033.1590567995758.25&__hssc=212684107.4.1590567995758&__hsfp=2692403025